*Note: Shipping costs will vary by location and carrier, email [email protected] for a shipping quote.

Items available for local pick up Fountain Valley, CA at no charge.

DSPORT Item # DS-036

Part # Discontinued

Condition: Used (Testing Only)

The Remark Cat Back Exhaust is made from TIG-welded, 304 stainless-steel. The 76.2mm piping has 1.5mm-thick walls, and narrows down to 63.4mm after the Y-pipe into the muffler inlets. The four pieces fasten together via 8.6mm cast flanges and a 10mm laser-cut flange at the down pipe end. With a weight of 34.5 lbs., this exhaust is the lightest stainless-steel system in the lineup. The two mufflers with their giant 106.5mm (changeable) tips made for a strong, bass-heavy tone. The exhaust found its peak volume at 3,000 RPM with 93 decibels. The Remark exhaust system increased peak wheel horsepower by 2.6 for a maximum of 280.14whp at 5,900 RPM, while peak torque jumped up by 7.83 lb-ft to produce a maximum of 283.17 lb-ft at 3,700 RPM. The dyno test revealed a steady torque gain of approximately 10 lb-ft from 3,500 RPM to 4,500 RPM, while significant horsepower gains fed into the top end from 6,000 RPM to redline with a 10-15whp increase.

Product Notes

Weight: 34.5 lbs. / 15.6 kg   Material: 304 Stainless Steel

Layout / Weld Type: Four-Piece / TIG welded

Muffler(s) / Resonators:  Two mufflers

Wall Thickness: 1.5mm

Flanges: 9mm cast flanges and 10mm laser-cut flange

Tips: Dual 106.5mm dual-wall, slant cut

Hangers: Five, hollow

Street Price: $1,195.00