*Note: Shipping costs will vary by location and carrier, email [email protected] for a shipping quote.
Items available for local pick up Fountain Valley, CA at no charge.
DSPORT Item # DS-038
Part # MMEXH-WRX-15
Condition: Used (Testing Only)
Mishimoto’s Cat-Back Exhaust for the 2015+ WRX and STI comes in four pieces made from TIG-welded 304 stainless-steel. The 76.2mm piping has 1.5mm-thick walls and attaches together with a laser-cut flange at the down pipe end, a slip-fit opening with clamp at the mid-pipe to the Y-pipe, then V-band fittings from the Y-pipe to the muffler inlets. After the Y-pipe splits into the two muffler inlets, pipe diameter narrows from 76.2mm to 57.1mm on each side. Mishimoto’s exhaust system delivered an emphasized deep rumble sound from the EJ257, while keeping sound levels at or below 90 decibels across the tested RPM range. On the dyno, the Mishimoto exhaust revealed a 2.93 peak wheel-horsepower increase to reach a new maximum of 280.47whp at 5,900 RPM. Torque saw more notable gains, maxing out at 292.82 lb-ft at 3,800 RPM for an increase of 9.65 lb-ft over stock.
Product Notes
Weight: 39.2 lbs. / 17.8 kg Material: 304 Stainless Steel
Layout / Weld Type: Four-Piece / TIG welded
Muffler(s) / Resonators: Two mufflers
Wall Thickness: 1.5mm
Flanges: Slip-fit with clamp, V-band and 13mm laser-cut flange
Tips: Quad 88.9mm dual-wall, slant
Hangers: Five, solid